5e Series Test Carbon Hydrogen Nitrogen Content Elemental Analyzer

• Element: Carbon, Hydrogen, Nitrogen
• Analysis: Combustion
• Application: Elemental Analyzer
• Function: Storage, Test Carbon, Hydrogen, Nitrogen Content
• Weight: 110kg
• Power Source: AC220V±22V
• Model NO.: CHL-5E
• Consumption: Helium 200ml/Min
• Sample Mass: up to 1000mg, Depending on Sample Matrix
• Analysis Time: 4-6 Mins, Depending on Sample Combustion Condition
• Sample Loader: Stackable Auto Loader, up to 140 Samples by 4 Laye
• Transport Package: Wooden Packing
• Specification: Dimensions(L*W*H): 690mm*750mm*720mm
• Trademark: ICLEAR
• Origin: China
• Production Capacity: 300pieces/Year

Product Description

5E Series Test Carbon Hydrogen Nitrogen Content Elemental Analyzer
CHL-5E

5E Series C/H/N Elemental Analyzer is used to determine carbon, hydrogen, nitrogen content in solid and liquid material, such as coal, coke, oil, petroleum, biomass, fertilizer, plastic, food, hydrocarbons and plant tissue, leaves and tobacco, which is widely applied in power plants, coal mines, metallurgy, chemical industry, commercial inspection, scientific research, food industry, education etc.

Standard Configuration:
Computer
Printer
Main analyzer
Furnace reagent
High purity copper
N-Catalyst
H2O sorb reagent
Standrad Reference Material(GBW)
CO2 sorb reagent
Silica wool 
Lower crucible
Upper crucible
O-ring kit
Tool kit

Optional Configuration:
AR427 com-aid for liquid sample
Additional1 2 4 layers carousels
4cm x 4cm size tin-foil cup
Bigger size hole carousel

Models Available:
5E-CHN2200 to test Carbon, Hydrogen, Nitrogen content
5E-CH2200 to test Carbon, Hydrogen content
5E-TCN2200 to test Nitrogen content
5E-TCN2210 to test Nitrogen contentPre-sale
5E-IRH2200 to test Hydrogen content
5E-IRC2200 to test Carbon content
5E-CN2200 to test Carbon content, Nitrogen content

Features:
Maximum Efficiency
1. High throughput: standard auto loader for 35 samples per layer, stackable to 4 layers available.
2. Dual-stage furnace system with pure oxygen flow to ensure the complete combustion of all samples.

Good Environment Adaptability 
1. Optimum gas circuit provides good gas tightness of the system.
2. O-ring free from heat resource.

Minimum Consumption
1. Independent detectors to determine C, H, N respectively. Analysis of CH mode and CHN mode can be chosen on software. (For 5E-CHN2200)
2. Saving time, gas and reagent: only 5.5ml blended gas needed to be analyzed.

Unattended Operation
The operator is limited to just adding sample to auto sample loader. Then the instrument will finish the test, cool down and shut off automatically.
 

Model	5E-CHN2200 Elemental Analyzer
Conforms to Method	AS 1038.6.4, ASTM D5373, ASTM D5291, ISO 16634, ISO 16948, ISO 29541, EN 15407,EN ISO 16948:2015-0, GB/T 30728, GB/T 30733, UNI 15104, UNI CEN/TS 15407
Analysis Time	4-6 mins, depending on sample combustion conditions
Sample Loader	Stackable auto loader, up to 140 samples by 4 layers
Repeatability	Carbon(Cad)≤0.45%, Hydrogen(Had)≤0.10%, Nitrogen(Nad)≤0.05%
Sample Mass	Up to 1000mg, depending on sample matrix
Temp. Resolution	1ºC
Gas Required*	Helium, 99.99%, 0.25± 0.01 Mpa
	Oxygen, 99.5%, 0.25± 0.01 Mpa
	Nitrogen or compressed air, 0.25± 0.01 Mpa
Consumption	Helium 200ml/min
Furnace Type	Resistance furnace, Max temp 1050ºC
Power Supply	Single phase, AC220V ±10% , 50/60Hz, 5.5kW
Net Weight	110kg
Dimensions(L×W×H)	690mm×750mm×720mm
*Test Condition: If N≤0.5%, 99.995% high purity oxygen is required.

Spare parts

Drill Sampler

Crucible tong

Gas tube

Silicone grease

Sample box

Concave mould

Infrared carbon analysis cell

Infrared hydrogen analysis cell

Corundum ball

Silica cottom

U-type combustion tube

Upper Crucible

Lower crucible

Big purifying tube

Small purifying tube

High purity reduced copper

Furance reagent

Anhydrous magnesium perchlorate

Asbestos soda

Nitrogen reagent

EDTA

Tin-foil cup

Steady flow valve

Oxygen reducing valve

Cylinder

Upper furnace

Lower furnace

Furnace core

O-ring-26×3.55

O-ring-38.7×2.65

O-ring-8×1.8

O-ring-5×1.8

O-ring-14×1.8

O-ring-17×1.8

Connection terminal

Sample feed mechanism

Thermal conductivity cell assembly

Filter component

Ballast tank

Secondary combustion tube stopper weldment

Oxygen lance assembly

Guide pipe components

Cover of sample box

Slide block

Left guide rail

Right guide rail

Pawl

Vane

Bite type nuts

Furnace wire mat

Connector

Bite type clamp

Lower connector base

Lower joint

Upper connector

Lower pipe connector

Mainboard

Control board (CHN2200)

Fuse

Support tube

Reduction tube

View glass

High purity reduced copper

Asbestos soda

Five-port magnetic valve

Three-port magnetic valve

Regulator

Speed control valve

Speed valve

Pipe valve

Two-port solenoid valve

Copper connector

Separate direct connection

Stainless steel connector (Filter connector)

Connector

Universal connector

Silencer

Cylinder

Filter element

Filter

Thermocouple

Stopper

Heating blanket

Heating blanket II

Fan

Centrifugal fan

Fan protection net

O-ring-140×3.55

O-ring-19×1.8

O-ring-6×1.8

O-ring-5×1.8

O-ring-20×3.55

O-ring-19×1.8

O-ring-14×1.8

O-ring-6×2.65

O-ring-9×1.8

O-ring-18×2.65

O-ring-27×2.65

O-ring-28×2.65

O-ring-15×1.8

O-ring-35×2.65

O-ring-10×2.65

O-ring-7×2.65

O-ring-18×1.8

O-ring-74×3.55

O-ring-11.8×1.8

O-ring-10×1.8

O-ring-11×1.8

O-ring-22.4×3.55

Oxygen lance

Viewport glass

Tin-foil cup

Related Recommends

Company Information

FAQ

> if the machine broke after a period of use, can I return it back and get a refund?
iClear HealthCare has a secure procedure to do the product return and repair, please check our service
policy for more information.

 

> I have NO experience buying medical stuff in China. Is the quality good?
There are multiple options in China for medical equipment, iClear HealthCare aims to provide high-quality products at a competitive price.

 

> How long will it take to reach me after the payment?
By Express, it takes 5-7 working days to arrive;
By Air, 3-4 days to the international airport;
By Sea, around 25-55 days to the seaport.

 

>> Can you help set up a clinic or provide complete equipment for hospital projects?
We have a series of complete solutions for clinics and hospital equipment setup. iClear HealthCare has helped set up several clinics and 2 hospitals in East Asia, African, and Saudi and supply all the medical equipment. These projects have saved a lot of time, money, and energy for our customers.